11:56:03.001 Running procedure: 8.6.4.3
11:56:03.006 This procedure is enabled because the following options:
11:56:03.006 - supports.individualRemoteSupervisoryControl == true
11:56:03.007 step: 1
11:56:03.007 - If the DUT does not support placing its binary outputs in a local state no further testing is required in this section.
11:56:03.008 step: 2
11:56:03.008 - If the device allows for individual control point remote supervisory control, all points should be set to the 'Enabled' or 'Remote' mode.
11:56:03.009 step: 3
11:56:03.009 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:56:03.009 - g10v0, All Objects
11:56:03.010 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:56:03.010 g10v0, All Objects
11:56:03.010 --T-> fir: 1 fin: 1 seq: 0
11:56:03.010 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:56:03.011 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:56:03.011 C0 C0 01 0A 00 06 53 98
11:56:03.013 steps: 4 to 5
11:56:03.013 - Read a single fragment response w/ sequence(0x00)
11:56:03.013 - Verify that the DUT responds with g10v2
11:56:03.013 - Verify that each object has 'flags' in the Set(0x01, 0x81)}
11:56:03.013 - Verify that the IIN field does not contain bits IIN(LocalControl)
11:56:03.013 <-P-- 05 64 23 44 01 00 00 04 DE 56
11:56:03.013 C0 C0 81 90 00 0A 02 00 00 13 01 01 01 01 01 01 E9 C2
11:56:03.013 01 01 01 01 01 01 01 01 01 01 01 01 01 01 2F E0
11:56:03.013 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 35 dest: 1 src: 1024
11:56:03.015 <-T-- fir: 1 fin: 1 seq: 0
11:56:03.019 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:56:03.019 g10v2, 1-Byte Start/Stop, start: 0 stop: 19
11:56:03.019 [0] - flags: 0x01
11:56:03.019 [1] - flags: 0x01
11:56:03.019 [2] - flags: 0x01
11:56:03.019 [3] - flags: 0x01
11:56:03.019 [4] - flags: 0x01
11:56:03.019 [5] - flags: 0x01
11:56:03.019 [6] - flags: 0x01
11:56:03.019 [7] - flags: 0x01
11:56:03.019 [8] - flags: 0x01
11:56:03.019 [9] - flags: 0x01
11:56:03.019 [10] - flags: 0x01
11:56:03.019 [11] - flags: 0x01
11:56:03.019 [12] - flags: 0x01
11:56:03.019 [13] - flags: 0x01
11:56:03.019 [14] - flags: 0x01
11:56:03.019 [15] - flags: 0x01
11:56:03.019 [16] - flags: 0x01
11:56:03.019 [17] - flags: 0x01
11:56:03.019 [18] - flags: 0x01
11:56:03.019 [19] - flags: 0x01
11:56:03.021 step: 6
11:56:03.021 - Change the control switch or setting corresponding to index 0 to the 'Disabled' or 'Local' mode
11:56:03.021 - Cycle power to the DUT
11:56:03.030 step: 7
11:56:03.030 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:56:03.030 - g10v0, All Objects
11:56:03.031 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:56:03.031 g10v0, All Objects
11:56:03.032 --T-> fir: 1 fin: 1 seq: 0
11:56:03.032 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:56:03.032 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:56:03.032 C0 C1 01 0A 00 06 55 BB
11:56:03.034 steps: 8 to 9
11:56:03.034 - Read a single fragment response w/ sequence(0x01)
11:56:03.034 - Verify that the DUT responds with g10v2
11:56:03.034 - Verify that the object at index 0 has 'flags' in the Set(0x11, 0x91)}
11:56:03.034 - Verify that the IIN field contains IIN(LocalControl)
11:56:03.035 <-P-- 05 64 23 44 01 00 00 04 DE 56
11:56:03.035 C0 C1 81 B0 00 0A 02 00 00 13 11 01 01 01 01 01 E1 15
11:56:03.035 01 01 01 01 01 01 01 01 01 01 01 01 01 01 2F E0
11:56:03.036 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 35 dest: 1 src: 1024
11:56:03.036 <-T-- fir: 1 fin: 1 seq: 0
11:56:03.041 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, LocalControl, NeedTime)
11:56:03.041 g10v2, 1-Byte Start/Stop, start: 0 stop: 19
11:56:03.042 [0] - flags: 0x11
11:56:03.042 [1] - flags: 0x01
11:56:03.042 [2] - flags: 0x01
11:56:03.042 [3] - flags: 0x01
11:56:03.042 [4] - flags: 0x01
11:56:03.042 [5] - flags: 0x01
11:56:03.042 [6] - flags: 0x01
11:56:03.042 [7] - flags: 0x01
11:56:03.042 [8] - flags: 0x01
11:56:03.042 [9] - flags: 0x01
11:56:03.042 [10] - flags: 0x01
11:56:03.042 [11] - flags: 0x01
11:56:03.042 [12] - flags: 0x01
11:56:03.042 [13] - flags: 0x01
11:56:03.042 [14] - flags: 0x01
11:56:03.042 [15] - flags: 0x01
11:56:03.042 [16] - flags: 0x01
11:56:03.042 [17] - flags: 0x01
11:56:03.042 [18] - flags: 0x01
11:56:03.042 [19] - flags: 0x01
11:56:03.042 Passed procedure: 8.6.4.3