11:55:45.566 Running procedure: 8.5.3.2.3
11:55:45.569 This procedure is enabled because the following options:
11:55:45.569 - class.supportClass2 == true
11:55:45.570 step: 1
11:55:45.570 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:45.570 - g60v3, All Objects
11:55:45.571 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:45.571 g60v3, All Objects
11:55:45.571 --T-> fir: 1 fin: 1 seq: 0
11:55:45.572 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:55:45.572 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:55:45.572 C0 C0 01 3C 03 06 1A 4B
11:55:45.573 steps: 2 to 3
11:55:45.573 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
11:55:45.573 - If the response is not Null, verify that the device requests an application layer confirmation.
11:55:45.574 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:55:45.574 C0 C0 81 90 00 9B 2C
11:55:45.574 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:55:45.574 <-T-- fir: 1 fin: 1 seq: 0
11:55:45.574 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:55:45.575 step: 4
11:55:45.575 - Generate known Class Class 2 event data
11:55:45.575 Updated Counter 41: value=2, flags=1, timestamp=DNPTime(1586534145575)
11:55:45.576 Updated Counter 65535: value=2, flags=1, timestamp=DNPTime(1586534145575)
11:55:45.576 Updated Counter 1024: value=2, flags=1, timestamp=DNPTime(1586534145576)
11:55:45.577 step: 5
11:55:45.577 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.577 - g60v3, 2-Byte Count, count: 1
11:55:45.578 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.578 g60v3, 2-Byte Count, count: 1
11:55:45.578 --T-> fir: 1 fin: 1 seq: 0
11:55:45.578 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1
11:55:45.579 --P-> 05 64 0D C4 00 04 01 00 13 E1
11:55:45.579 C0 C1 01 3C 03 08 01 00 2A A8
11:55:45.580 steps: 6 to 10
11:55:45.580 - Read a single fragment response w/ sequence(0x01)
11:55:45.580 - Verify that the device responds with the first Class 2 event data generated
11:55:45.580 - Verify that the response only contains objects, variations, and qualifiers specified in table 8-4
11:55:45.580 - Verify that flag behavior complies with Section 2, Note #5.
11:55:45.580 - Verify that an application layer confirmation is requested.
11:55:45.581 <-P-- 05 64 16 44 01 00 00 04 14 27
11:55:45.581 C1 E1 81 94 00 16 01 28 01 00 29 00 01 02 00 00 33 9A
11:55:45.581 00 FF FF
11:55:45.582 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 22 dest: 1 src: 1024
11:55:45.582 <-T-- fir: 1 fin: 1 seq: 1
11:55:45.583 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, Class2Events)
11:55:45.583 g22v1, 2-Byte Count and Index, count: 1
11:55:45.583 [41] - flags: 0x01 count: 2
11:55:45.583 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.583 --T-> fir: 1 fin: 1 seq: 0
11:55:45.583 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:55:45.584 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:55:45.584 C0 C1 00 7D 3D
11:55:45.585 step: 11
11:55:45.585 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.585 - g60v3, 2-Byte Count, count: 2
11:55:45.586 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.586 g60v3, 2-Byte Count, count: 2
11:55:45.586 --T-> fir: 1 fin: 1 seq: 0
11:55:45.586 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1
11:55:45.587 --P-> 05 64 0D C4 00 04 01 00 13 E1
11:55:45.587 C0 C2 01 3C 03 08 02 00 27 F9
11:55:45.588 steps: 12 to 13
11:55:45.588 - Read a single fragment response w/ sequence(0x02)
11:55:45.588 - Verify that the device responds with the rest of the Class 2 event data generated
11:55:45.588 - Verify that the response only contains objects, variations, and qualifiers specified in table 8-4
11:55:45.588 - Verify that flag behavior complies with Section 2, Note #5.
11:55:45.588 - Verify that an application layer confirmation is requested.
11:55:45.589 <-P-- 05 64 1D 44 01 00 00 04 98 2E
11:55:45.589 C2 E2 81 90 00 16 01 28 02 00 FF FF 01 02 00 00 90 06
11:55:45.589 00 00 04 01 02 00 00 00 3E 59
11:55:45.590 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 29 dest: 1 src: 1024
11:55:45.590 <-T-- fir: 1 fin: 1 seq: 2
11:55:45.591 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:55:45.591 g22v1, 2-Byte Count and Index, count: 2
11:55:45.591 [65535] - flags: 0x01 count: 2
11:55:45.591 [1024] - flags: 0x01 count: 2
11:55:45.591 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.592 --T-> fir: 1 fin: 1 seq: 0
11:55:45.592 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:55:45.592 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:55:45.592 C0 C2 00 D6 8D
11:55:45.594 step: 14
11:55:45.594 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:55:45.594 - g60v3, All Objects
11:55:45.594 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:55:45.594 g60v3, All Objects
11:55:45.594 --T-> fir: 1 fin: 1 seq: 0
11:55:45.595 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:55:45.595 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:55:45.595 C0 C3 01 3C 03 06 10 2E
11:55:45.596 step: 15
11:55:45.596 - Read a single fragment response w/ sequence(0x03)
11:55:45.596 - Verify that the response is empty
11:55:45.597 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:55:45.597 C3 C3 81 90 00 D0 43
11:55:45.597 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:55:45.597 <-T-- fir: 1 fin: 1 seq: 3
11:55:45.598 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
11:55:45.598 Passed procedure: 8.5.3.2.3