11:55:45.031 Running procedure: 8.5.3.2.2
11:55:45.035 This procedure is enabled because the following options:
11:55:45.035 - class.supportClass2 == true
11:55:45.036 step: 1
11:55:45.036 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:45.036 - g60v3, All Objects
11:55:45.037 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:45.037 g60v3, All Objects
11:55:45.037 --T-> fir: 1 fin: 1 seq: 0
11:55:45.037 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:55:45.038 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:55:45.038 C0 C0 01 3C 03 06 1A 4B
11:55:45.039 steps: 2 to 3
11:55:45.039 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
11:55:45.039 - If the response is not Null, verify that the device requests an application layer confirmation.
11:55:45.039 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:55:45.039 C0 C0 81 90 00 9B 2C
11:55:45.039 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:55:45.040 <-T-- fir: 1 fin: 1 seq: 0
11:55:45.040 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:55:45.041 step: 4
11:55:45.041 - Generate known Class Class 2 event data
11:55:45.041 Updated Counter 0: value=2, flags=1, timestamp=DNPTime(1586534145041)
11:55:45.041 Updated Counter 41: value=2, flags=1, timestamp=DNPTime(1586534145041)
11:55:45.042 Updated Counter 65535: value=2, flags=1, timestamp=DNPTime(1586534145041)
11:55:45.042 step: 5
11:55:45.042 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.042 - g60v3, 1-Byte Count, count: 1
11:55:45.043 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.043 g60v3, 1-Byte Count, count: 1
11:55:45.043 --T-> fir: 1 fin: 1 seq: 0
11:55:45.044 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
11:55:45.044 --P-> 05 64 0C C4 00 04 01 00 F4 54
11:55:45.044 C0 C1 01 3C 03 07 01 D7 E4
11:55:45.046 steps: 6 to 10
11:55:45.046 - Read a single fragment response w/ sequence(0x01)
11:55:45.046 - Verify that the device responds with the first Class 2 event data generated
11:55:45.046 - Verify that the response only contains objects, variations, and qualifiers specified in table 8-4
11:55:45.046 - Verify that flag behavior complies with Section 2, Note #5.
11:55:45.046 - Verify that an application layer confirmation is requested.
11:55:45.047 <-P-- 05 64 16 44 01 00 00 04 14 27
11:55:45.047 C1 E1 81 94 00 16 01 28 01 00 00 00 01 02 00 00 8A 44
11:55:45.047 00 FF FF
11:55:45.047 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 22 dest: 1 src: 1024
11:55:45.047 <-T-- fir: 1 fin: 1 seq: 1
11:55:45.048 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, Class2Events)
11:55:45.048 g22v1, 2-Byte Count and Index, count: 1
11:55:45.048 [0] - flags: 0x01 count: 2
11:55:45.049 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:55:45.049 --T-> fir: 1 fin: 1 seq: 0
11:55:45.049 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:55:45.050 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:55:45.050 C0 C1 00 7D 3D
11:55:45.051 step: 11
11:55:45.051 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.051 - g60v3, 1-Byte Count, count: 2
11:55:45.051 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.051 g60v3, 1-Byte Count, count: 2
11:55:45.051 --T-> fir: 1 fin: 1 seq: 0
11:55:45.052 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
11:55:45.052 --P-> 05 64 0C C4 00 04 01 00 F4 54
11:55:45.052 C0 C2 01 3C 03 07 02 65 2D
11:55:45.054 steps: 12 to 13
11:55:45.054 - Read a single fragment response w/ sequence(0x02)
11:55:45.054 - Verify that the device responds with the rest of the Class 2 event data generated
11:55:45.054 - Verify that the response only contains objects, variations, and qualifiers specified in table 8-4
11:55:45.054 - Verify that flag behavior complies with Section 2, Note #5.
11:55:45.054 - Verify that an application layer confirmation is requested.
11:55:45.055 <-P-- 05 64 1D 44 01 00 00 04 98 2E
11:55:45.055 C2 E2 81 90 00 16 01 28 02 00 29 00 01 02 00 00 2C F5
11:55:45.055 00 FF FF 01 02 00 00 00 5B FB
11:55:45.055 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 29 dest: 1 src: 1024
11:55:45.055 <-T-- fir: 1 fin: 1 seq: 2
11:55:45.056 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:55:45.056 g22v1, 2-Byte Count and Index, count: 2
11:55:45.056 [41] - flags: 0x01 count: 2
11:55:45.056 [65535] - flags: 0x01 count: 2
11:55:45.057 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:55:45.057 --T-> fir: 1 fin: 1 seq: 0
11:55:45.057 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:55:45.058 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:55:45.058 C0 C2 00 D6 8D
11:55:45.059 step: 14
11:55:45.059 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:55:45.059 - g60v3, All Objects
11:55:45.059 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:55:45.059 g60v3, All Objects
11:55:45.060 --T-> fir: 1 fin: 1 seq: 0
11:55:45.060 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:55:45.060 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:55:45.060 C0 C3 01 3C 03 06 10 2E
11:55:45.060 step: 15
11:55:45.060 - Read a single fragment response w/ sequence(0x03)
11:55:45.060 - Verify that the response is empty
11:55:45.061 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:55:45.061 C3 C3 81 90 00 D0 43
11:55:45.061 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:55:45.061 <-T-- fir: 1 fin: 1 seq: 3
11:55:45.061 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
11:55:45.062 Passed procedure: 8.5.3.2.2