11:55:33.397		Running procedure: 8.4.3.2.3
11:55:33.401		This procedure is enabled because the following options:
11:55:33.401		- supports.disable.analogOutput == true
11:55:33.401		step: 2
11:55:33.401		- Configure the DUT such that all Analog Output points are uninstalled or disabled
11:55:33.406		step: 3
11:55:33.406		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:33.406		- g41v2, 2-Byte Count and Index, count: 1
11:55:33.406		- [0] - value: 10 status: 0
11:55:33.407	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:33.407		g41v2, 2-Byte Count and Index, count: 1
11:55:33.407		[0] - value: 10 status: 0
11:55:33.408	--T->	fir: 1 fin: 1 seq: 0
11:55:33.408	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
11:55:33.408	--P->	05 64 12 C4 00 04 01 00 30 DD
11:55:33.408		C0 C0 06 29 02 28 01 00 00 00 0A 00 00 F6 8F
11:55:33.409		step: 4
11:55:33.409		- Verify that no link layer frames are received
11:55:34.409		frame receive timeout
11:55:34.409		step: 5
11:55:34.409		- Check that no analog control point operated
11:55:35.415		Passed procedure: 8.4.3.2.3