11:55:17.562		Running procedure: 8.4.1.2.7
11:55:17.568		This procedure is enabled because the following options:
11:55:17.568		- supports.analogOutput.status == true
11:55:17.568		- supports.disable.analogOutput == true
11:55:17.568		step: 1
11:55:17.568		- Device supports disabling analog outputs
11:55:17.569		step: 2
11:55:17.569		- Configure the DUT such that all Analog Output points are uninstalled or disabled
11:55:17.574		step: 3
11:55:17.574		- Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:17.574		- g41v2, 2-Byte Count and Index, count: 1
11:55:17.574		- [0] - value: 10 status: 0
11:55:17.576	--A->	Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:17.576		g41v2, 2-Byte Count and Index, count: 1
11:55:17.576		[0] - value: 10 status: 0
11:55:17.576	--T->	fir: 1 fin: 1 seq: 0
11:55:17.576	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
11:55:17.577	--P->	05 64 12 C4 00 04 01 00 30 DD
11:55:17.577		C0 C0 03 29 02 28 01 00 00 00 0A 00 00 40 C3
11:55:17.578		step: 4
11:55:17.578		- Read a single fragment response w/ sequence(0x00)
11:55:17.578		- Verify that the IIN field contains one of IIN(ParamError, ObjectUnknown)
11:55:17.579	<-P--	05 64 14 44 01 00 00 04 A3 01
11:55:17.579		C0 C0 81 90 04 29 02 28 01 00 00 00 0A 00 04 81 EF
11:55:17.579	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024
11:55:17.579	<-T--	fir: 1 fin: 1 seq: 0
11:55:17.580	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ParamError)
11:55:17.580		g41v2, 2-Byte Count and Index, count: 1
11:55:17.580		[0] - value: 10 status: 4
11:55:17.581		step: 5
11:55:17.581		- Check that no analog control point operated
11:55:18.584		Passed procedure: 8.4.1.2.7