11:55:08.419		Running procedure: 8.4.1.2.3
11:55:08.423		This procedure is enabled because the following options:
11:55:08.423		- supports.analogOutput.status == true
11:55:08.424		step: 1
11:55:08.424		- Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:08.424		- g41v2, 2-Byte Count and Index, count: 1
11:55:08.424		- [65535] - value: 10 status: 0
11:55:08.426	--A->	Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:08.426		g41v2, 2-Byte Count and Index, count: 1
11:55:08.426		[65535] - value: 10 status: 0
11:55:08.426	--T->	fir: 1 fin: 1 seq: 0
11:55:08.426	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
11:55:08.427	--P->	05 64 12 C4 00 04 01 00 30 DD
11:55:08.427		C0 C0 03 29 02 28 01 00 FF FF 0A 00 00 FD 11
11:55:08.428		step: 2
11:55:08.428		- Read a single fragment response w/ sequence(0x00)
11:55:08.428		- Verify that the IIN field contains IIN(ParamError)
11:55:08.428		- Verify the response contains the exact object header:
11:55:08.428		- g41v2, 2-Byte Count and Index, count: 1
11:55:08.428		- [65535] - value: 10 status: 4
11:55:08.429	<-P--	05 64 14 44 01 00 00 04 A3 01
11:55:08.429		C0 C0 81 90 04 29 02 28 01 00 FF FF 0A 00 04 3C 3D
11:55:08.429	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024
11:55:08.430	<-T--	fir: 1 fin: 1 seq: 0
11:55:08.430	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ParamError)
11:55:08.430		g41v2, 2-Byte Count and Index, count: 1
11:55:08.430		[65535] - value: 10 status: 4
11:55:08.431		step: 3
11:55:08.431		- Check that no analog control point operated
11:55:09.437		Passed procedure: 8.4.1.2.3