12:02:15.829 Running procedure: 8.22.2.2
12:02:15.835 This procedure is enabled because the following options:
12:02:15.835 - supports.doubleBitChangeEvents == true
12:02:15.836 step: 1
12:02:15.836 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
12:02:15.836 - g4v0, All Objects
12:02:15.837 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
12:02:15.837 g4v0, All Objects
12:02:15.837 --T-> fir: 1 fin: 1 seq: 0
12:02:15.837 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
12:02:15.838 --P-> 05 64 0B C4 00 04 01 00 CA 8A
12:02:15.838 C0 C1 01 04 00 06 05 23
12:02:15.839 step: 2
12:02:15.839 - Read a single fragment response w/ sequence(0x01)
12:02:15.839 - If the response is not Null, verify that the device requests an application layer confirmation.
12:02:15.840 <-P-- 05 64 0A 44 01 00 00 04 67 88
12:02:15.840 C0 C1 81 90 00 73 EE
12:02:15.840 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
12:02:15.840 <-T-- fir: 1 fin: 1 seq: 0
12:02:15.841 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
12:02:15.841 step: 3
12:02:15.841 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
12:02:15.841 - g4v0, All Objects
12:02:15.842 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
12:02:15.842 g4v0, All Objects
12:02:15.842 --T-> fir: 1 fin: 1 seq: 0
12:02:15.842 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
12:02:15.843 --P-> 05 64 0B C4 00 04 01 00 CA 8A
12:02:15.843 C0 C2 01 04 00 06 0F 46
12:02:15.844 step: 4
12:02:15.844 - Read a single fragment response w/ sequence(0x02)
12:02:15.844 - Verify that the response is empty
12:02:15.845 <-P-- 05 64 0A 44 01 00 00 04 67 88
12:02:15.845 C1 C2 81 90 00 34 C7
12:02:15.845 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
12:02:15.846 <-T-- fir: 1 fin: 1 seq: 1
12:02:15.846 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
12:02:15.847 step: 5
12:02:15.847 - Generate several Double-bit Binary Input Change Events
12:02:15.847 Updated DBBI 1024: value=DETERMINED_ON, flags=81, timestamp=DNPTime(1586534535847)
12:02:15.848 Updated DBBI 41: value=DETERMINED_OFF, flags=41, timestamp=DNPTime(1586534535847)
12:02:15.848 Updated DBBI 41: value=DETERMINED_ON, flags=81, timestamp=DNPTime(1586534535848)
12:02:15.849 step: 6
12:02:15.849 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
12:02:15.849 - g4v0, All Objects
12:02:15.849 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
12:02:15.849 g4v0, All Objects
12:02:15.850 --T-> fir: 1 fin: 1 seq: 0
12:02:15.850 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
12:02:15.850 --P-> 05 64 0B C4 00 04 01 00 CA 8A
12:02:15.850 C0 C3 01 04 00 06 09 65
12:02:15.852 steps: 7 to 11
12:02:15.852 - Read a single fragment response w/ sequence(0x03)
12:02:15.852 - Verify the device responds with all generated Double-bit Binary events
12:02:15.852 - If the variation contains timestamps, verify that they are reasonable according to the resolution specified in the Device Profile
12:02:15.852 - Verify that an application layer confirmation is requested.
12:02:15.852 - Verify that the response contains only the following variations: List(g4v1, g4v2, g4v3)
12:02:15.852 - Verify that the data is reported using 8 bit indexing (qualifier 0x17) or 16 bit indexing (qualifier 0x28).
12:02:15.852 - Verify that flag behavior complies with Section 2, Note #5.
12:02:15.853 <-P-- 05 64 18 44 01 00 00 04 11 D6
12:02:15.853 C2 E3 81 90 00 04 01 28 03 00 00 04 81 29 00 41 5D B9
12:02:15.853 29 00 81 EE 5B
12:02:15.853 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 24 dest: 1 src: 1024
12:02:15.853 <-T-- fir: 1 fin: 1 seq: 2
12:02:15.855 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
12:02:15.855 g4v1, 2-Byte Count and Index, count: 3
12:02:15.855 [1024] - flags: 0x81
12:02:15.855 [41] - flags: 0x41
12:02:15.855 [41] - flags: 0x81
12:02:15.855 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
12:02:15.855 --T-> fir: 1 fin: 1 seq: 0
12:02:15.856 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
12:02:15.856 --P-> 05 64 08 C4 00 04 01 00 9A 19
12:02:15.856 C0 C3 00 98 26
12:02:15.858 step: 12
12:02:15.858 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
12:02:15.858 - g4v0, All Objects
12:02:15.859 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
12:02:15.859 g4v0, All Objects
12:02:15.859 --T-> fir: 1 fin: 1 seq: 0
12:02:15.859 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
12:02:15.860 --P-> 05 64 0B C4 00 04 01 00 CA 8A
12:02:15.860 C0 C4 01 04 00 06 1B 8C
12:02:15.861 step: 13
12:02:15.861 - Read a single fragment response w/ sequence(0x04)
12:02:15.861 - Verify that the response is empty
12:02:15.862 <-P-- 05 64 0A 44 01 00 00 04 67 88
12:02:15.862 C3 C4 81 90 00 BA 95
12:02:15.862 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
12:02:15.863 <-T-- fir: 1 fin: 1 seq: 3
12:02:15.863 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
12:02:15.863 Passed procedure: 8.22.2.2