12:02:14.719		Running procedure: 8.21.2.2
12:02:14.724		This procedure is enabled because the following options:
12:02:14.724		- supports.disable.doubleBit == true
12:02:14.725		step: 1
12:02:14.725		- If the device is not configurable in a manner such that Double-bit Input points can be uninstalled or disabled, no further testing in this section is necessary
12:02:14.726		step: 2
12:02:14.726		- Configure the DUT such that all Double-bit Binary Input points are uninstalled or disabled
12:02:14.726		- Cycle power to the DUT
12:02:14.735		step: 3
12:02:14.735		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
12:02:14.735		- g3v0, All Objects
12:02:14.736	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
12:02:14.736		g3v0, All Objects
12:02:14.736	--T->	fir: 1 fin: 1 seq: 0
12:02:14.736	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
12:02:14.737	--P->	05 64 0B C4 00 04 01 00 CA 8A
12:02:14.737		C0 C0 01 03 00 06 2B 4C
12:02:14.738		step: 4
12:02:14.738		- Read a single fragment response w/ sequence(0x00)
12:02:14.738		- Verify that the response is empty
12:02:14.738	<-P--	05 64 0A 44 01 00 00 04 67 88
12:02:14.738		C0 C0 81 90 00 9B 2C
12:02:14.739	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
12:02:14.739	<-T--	fir: 1 fin: 1 seq: 0
12:02:14.739	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
12:02:14.739		Passed procedure: 8.21.2.2