11:55:06.240 Running procedure: 8.2.5.2.2
11:55:06.243 This procedure is enabled because the following options:
11:55:06.243 - supports.binaryOutput.status == true
11:55:06.244 step: 3
11:55:06.244 - DUT supports the 0x01 (Pulse On/NUL) control code for single function binary output point at index 5.
11:55:06.245 step: 4
11:55:06.245 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.245 - g12v1, 1-Byte Count and Index, count: 1
11:55:06.245 - [5] - code: 1 count: 25 onTime: 1100 offTime: 1200 status: 0
11:55:06.246 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.246 g12v1, 1-Byte Count and Index, count: 1
11:55:06.246 [5] - code: 1 count: 25 onTime: 1100 offTime: 1200 status: 0
11:55:06.246 --T-> fir: 1 fin: 1 seq: 0
11:55:06.247 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:55:06.248 --P-> 05 64 18 C4 00 04 01 00 5B 61
11:55:06.248 C0 C0 05 0C 01 17 01 05 01 19 4C 04 00 00 B0 04 11 BD
11:55:06.248 00 00 00 FF FF
11:55:06.248 step: 5
11:55:06.248 - Check that binary control point 5 operate
11:55:06.249 step: 7
11:55:06.249 - DUT supports the 0x03 (Latch On/NUL) control code for single function binary output point at index 6.
11:55:06.250 step: 8
11:55:06.250 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.250 - g12v1, 1-Byte Count and Index, count: 1
11:55:06.250 - [6] - code: 3 count: 30 onTime: 1300 offTime: 1400 status: 0
11:55:06.251 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.251 g12v1, 1-Byte Count and Index, count: 1
11:55:06.251 [6] - code: 3 count: 30 onTime: 1300 offTime: 1400 status: 0
11:55:06.251 --T-> fir: 1 fin: 1 seq: 0
11:55:06.251 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:55:06.252 --P-> 05 64 18 C4 00 04 01 00 5B 61
11:55:06.252 C0 C0 05 0C 01 17 01 06 03 1E 14 05 00 00 78 05 F0 E8
11:55:06.252 00 00 00 FF FF
11:55:06.253 step: 9
11:55:06.253 - Check that binary control point 6 operate
11:55:06.253 step: 10
11:55:06.253 - DUT supports the 0x04 (Latch Off/NUL) control code for single function binary output point at index 7.
11:55:06.254 step: 11
11:55:06.254 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.254 - g12v1, 1-Byte Count and Index, count: 1
11:55:06.254 - [7] - code: 4 count: 35 onTime: 1500 offTime: 1600 status: 0
11:55:06.255 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.255 g12v1, 1-Byte Count and Index, count: 1
11:55:06.255 [7] - code: 4 count: 35 onTime: 1500 offTime: 1600 status: 0
11:55:06.255 --T-> fir: 1 fin: 1 seq: 0
11:55:06.256 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:55:06.257 --P-> 05 64 18 C4 00 04 01 00 5B 61
11:55:06.257 C0 C0 05 0C 01 17 01 07 04 23 DC 05 00 00 40 06 5E 6F
11:55:06.257 00 00 00 FF FF
11:55:06.258 step: 12
11:55:06.258 - Check that binary control point 7 operate
11:55:06.258 step: 13
11:55:06.258 - DUT supports the 0x41 (Pulse On/Close) control code for single function binary output point at index 8.
11:55:06.259 step: 14
11:55:06.259 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.259 - g12v1, 1-Byte Count and Index, count: 1
11:55:06.259 - [8] - code: 65 count: 40 onTime: 1700 offTime: 1800 status: 0
11:55:06.260 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.260 g12v1, 1-Byte Count and Index, count: 1
11:55:06.260 [8] - code: 65 count: 40 onTime: 1700 offTime: 1800 status: 0
11:55:06.260 --T-> fir: 1 fin: 1 seq: 0
11:55:06.261 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:55:06.262 --P-> 05 64 18 C4 00 04 01 00 5B 61
11:55:06.262 C0 C0 05 0C 01 17 01 08 41 28 A4 06 00 00 08 07 FF AC
11:55:06.262 00 00 00 FF FF
11:55:06.262 step: 15
11:55:06.262 - Check that binary control point 8 operate
11:55:06.263 step: 16
11:55:06.263 - DUT supports the 0x81 (Pulse On/Trip) control code for single function binary output point at index 9.
11:55:06.264 step: 17
11:55:06.264 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.264 - g12v1, 1-Byte Count and Index, count: 1
11:55:06.264 - [9] - code: 129 count: 45 onTime: 1900 offTime: 2000 status: 0
11:55:06.264 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:06.264 g12v1, 1-Byte Count and Index, count: 1
11:55:06.264 [9] - code: 129 count: 45 onTime: 1900 offTime: 2000 status: 0
11:55:06.265 --T-> fir: 1 fin: 1 seq: 0
11:55:06.265 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:55:06.266 --P-> 05 64 18 C4 00 04 01 00 5B 61
11:55:06.266 C0 C0 05 0C 01 17 01 09 81 2D 6C 07 00 00 D0 07 E4 85
11:55:06.266 00 00 00 FF FF
11:55:06.267 step: 18
11:55:06.267 - Check that binary control point 9 operate
11:55:06.267 Passed procedure: 8.2.5.2.2