11:55:02.626		Running procedure: 8.2.3.2.3
11:55:02.631		This procedure is enabled because the following options:
11:55:02.631		- supports.binaryOutput.status == true
11:55:02.631		- supports.disable.binaryOutput == true
11:55:02.632		step: 2
11:55:02.632		- Configure the DUT such that all Binary Output points are uninstalled or disabled
11:55:02.637		step: 3
11:55:02.637		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:02.637		- g12v1, 2-Byte Count and Index, count: 1
11:55:02.637		- [0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:55:02.637	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:55:02.637		g12v1, 2-Byte Count and Index, count: 1
11:55:02.637		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:55:02.637	--T->	fir: 1 fin: 1 seq: 0
11:55:02.638	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1
11:55:02.639	--P->	05 64 1A C4 00 04 01 00 EC 47
11:55:02.639		C0 C0 06 0C 01 28 01 00 00 00 03 01 64 00 00 00 CD AE
11:55:02.639		C8 00 00 00 00 78 FB
11:55:02.639		step: 4
11:55:02.639		- Verify that no link layer frames are received
11:55:03.640		frame receive timeout
11:55:03.641		step: 5
11:55:03.641		- Check that no binary control point operated
11:55:04.645		Passed procedure: 8.2.3.2.3