11:54:58.524		Running procedure: 8.2.3.2.1
11:54:58.529		step: 1
11:54:58.529		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:58.529		- g12v1, 1-Byte Count and Index, count: 1
11:54:58.529		- [0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:58.530	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:58.530		g12v1, 1-Byte Count and Index, count: 1
11:54:58.530		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:58.531	--T->	fir: 1 fin: 1 seq: 0
11:54:58.531	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
11:54:58.532	--P->	05 64 18 C4 00 04 01 00 5B 61
11:54:58.532		C0 C0 06 0C 01 17 01 00 03 01 64 00 00 00 C8 00 CD D4
11:54:58.532		00 00 00 FF FF
11:54:58.533		step: 2
11:54:58.533		- Verify that no link layer frames are received
11:54:59.533		frame receive timeout
11:54:59.534		step: 3
11:54:59.534		- If the device does not support control outputs, end testing of this section
11:54:59.534		step: 4
11:54:59.534		- Check that binary control point 0 operate
11:54:59.534		Passed procedure: 8.2.3.2.1