11:54:57.001		Running procedure: 8.2.2.2.3
11:54:57.006		This procedure is enabled because the following options:
11:54:57.006		- supports.binaryOutput.status == true
11:54:57.006		- supports.disable.binaryOutput == true
11:54:57.007		step: 1
11:54:57.007		- Device supports disabling controls:
11:54:57.007		step: 2
11:54:57.007		- Configure the DUT such that all Binary Output points are uninstalled or disabled
11:54:57.011		step: 3
11:54:57.011		- Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:57.011		- g12v1, 2-Byte Count and Index, count: 1
11:54:57.011		- [0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:57.012	--A->	Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:57.012		g12v1, 2-Byte Count and Index, count: 1
11:54:57.012		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:57.013	--T->	fir: 1 fin: 1 seq: 0
11:54:57.013	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1
11:54:57.014	--P->	05 64 1A C4 00 04 01 00 EC 47
11:54:57.014		C0 C0 05 0C 01 28 01 00 00 00 03 01 64 00 00 00 DD ED
11:54:57.014		C8 00 00 00 00 78 FB
11:54:57.015		step: 4
11:54:57.015		- Read a single fragment response w/ sequence(0x00)
11:54:57.015		- Verify that the IIN field contains one of IIN(ParamError, ObjectUnknown)
11:54:57.016	<-P--	05 64 1C 44 01 00 00 04 7F 9B
11:54:57.016		C0 C0 81 90 04 0C 01 28 01 00 00 00 03 01 64 00 1E 04
11:54:57.016		00 00 C8 00 00 00 04 00 22
11:54:57.017	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 28 dest: 1 src: 1024
11:54:57.017	<-T--	fir: 1 fin: 1 seq: 0
11:54:57.018	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ParamError)
11:54:57.018		g12v1, 2-Byte Count and Index, count: 1
11:54:57.018		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 4
11:54:57.018		step: 5
11:54:57.018		- Check that no binary control point operated
11:54:58.022		Passed procedure: 8.2.2.2.3