11:54:46.707		Running procedure: 8.2.1.2.10
11:54:46.712		This procedure is enabled because the following options:
11:54:46.712		- supports.binaryOutput.status == true
11:54:46.712		- supports.disable.binaryOutput == true
11:54:46.713		step: 1
11:54:46.713		- Device supports disabling controls!
11:54:46.713		step: 2
11:54:46.713		- Configure the DUT such that all Binary Output points are uninstalled or disabled
11:54:46.713		- Cycle power to the DUT
11:54:46.726		step: 3
11:54:46.726		- Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:46.726		- g12v1, 2-Byte Count and Index, count: 1
11:54:46.726		- [0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:46.728	--A->	Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:54:46.728		g12v1, 2-Byte Count and Index, count: 1
11:54:46.728		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 0
11:54:46.728	--T->	fir: 1 fin: 1 seq: 0
11:54:46.729	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1
11:54:46.730	--P->	05 64 1A C4 00 04 01 00 EC 47
11:54:46.730		C0 C0 03 0C 01 28 01 00 00 00 03 01 64 00 00 00 FD 6B
11:54:46.730		C8 00 00 00 00 78 FB
11:54:46.731		step: 4
11:54:46.731		- Read a single fragment response w/ sequence(0x00)
11:54:46.731		- Verify that the IIN field contains one of IIN(ParamError, ObjectUnknown)
11:54:46.733	<-P--	05 64 1C 44 01 00 00 04 7F 9B
11:54:46.733		C0 C0 81 90 04 0C 01 28 01 00 00 00 03 01 64 00 1E 04
11:54:46.733		00 00 C8 00 00 00 04 00 22
11:54:46.733	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 28 dest: 1 src: 1024
11:54:46.733	<-T--	fir: 1 fin: 1 seq: 0
11:54:46.735	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ParamError)
11:54:46.735		g12v1, 2-Byte Count and Index, count: 1
11:54:46.735		[0] - code: 3 count: 1 onTime: 100 offTime: 200 status: 4
11:54:46.737		step: 5
11:54:46.737		- Check that no binary control point operated
11:54:47.739		Passed procedure: 8.2.1.2.10