| 12:01:49.907 | Running procedure: 8.16.1.2.2 | |
| 12:01:49.913 | This procedure is enabled because the following options: | |
| 12:01:49.913 | - supports.counter == true | |
| 12:01:49.914 | step: 1 | |
| 12:01:49.914 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 12:01:49.914 | - g20v0, All Objects | |
| 12:01:49.916 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 12:01:49.916 | g20v0, All Objects | |
| 12:01:49.916 | --T-> | fir: 1 fin: 1 seq: 0 |
| 12:01:49.916 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 12:01:49.917 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 12:01:49.917 | C0 C1 01 14 00 06 FC F5 | |
| 12:01:49.918 | steps: 2 to 3 | |
| 12:01:49.918 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 12:01:49.918 | - Verify that the response only contains objects, variations, and qualifiers specified in table 8-5 | |
| 12:01:49.920 | <-P-- | 05 64 32 44 01 00 00 04 F8 9B |
| 12:01:49.920 | C0 C1 81 90 00 14 02 01 00 00 00 00 01 01 00 14 7D D6 | |
| 12:01:49.920 | 02 01 29 00 29 00 01 01 00 14 02 01 00 04 00 04 A5 78 | |
| 12:01:49.920 | 01 01 00 14 02 01 FF FF FF FF 01 01 00 0E 40 | |
| 12:01:49.920 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 50 dest: 1 src: 1024 |
| 12:01:49.921 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 12:01:49.924 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 12:01:49.924 | g20v2, 2-Byte Start/Stop, start: 0 stop: 0 | |
| 12:01:49.924 | [0] - flags: 0x01 count: 1 | |
| 12:01:49.924 | g20v2, 2-Byte Start/Stop, start: 41 stop: 41 | |
| 12:01:49.924 | [41] - flags: 0x01 count: 1 | |
| 12:01:49.924 | g20v2, 2-Byte Start/Stop, start: 1024 stop: 1024 | |
| 12:01:49.924 | [1024] - flags: 0x01 count: 1 | |
| 12:01:49.924 | g20v2, 2-Byte Start/Stop, start: 65535 stop: 65535 | |
| 12:01:49.924 | [65535] - flags: 0x01 count: 1 | |
| 12:01:49.925 | step: 4 | |
| 12:01:49.925 | - Generate binary counter input data | |
| 12:01:49.926 | Updated Counter 65535: value=2, flags=1, timestamp=DNPTime(1586534509925) | |
| 12:01:49.926 | Updated Counter 1024: value=2, flags=1, timestamp=DNPTime(1586534509926) | |
| 12:01:49.927 | Updated Counter 41: value=2, flags=1, timestamp=DNPTime(1586534509926) | |
| 12:01:49.927 | step: 5 | |
| 12:01:49.927 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 12:01:49.927 | - g20v0, All Objects | |
| 12:01:49.927 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 12:01:49.927 | g20v0, All Objects | |
| 12:01:49.927 | --T-> | fir: 1 fin: 1 seq: 0 |
| 12:01:49.928 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 12:01:49.928 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 12:01:49.928 | C0 C2 01 14 00 06 F6 90 | |
| 12:01:49.930 | steps: 6 to 8 | |
| 12:01:49.930 | - Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16 | |
| 12:01:49.930 | - Verify that the reported values match the values recorded previously plus the counts generated | |
| 12:01:49.930 | - Verify that the response only contains objects, variations, and qualifiers specified in table 8-5 | |
| 12:01:49.930 | - Verify that flag behavior complies with Section 2, Note #5. | |
| 12:01:49.931 | <-P-- | 05 64 32 44 01 00 00 04 F8 9B |
| 12:01:49.931 | C1 C2 81 94 00 14 02 01 00 00 00 00 01 01 00 14 4C 18 | |
| 12:01:49.931 | 02 01 29 00 29 00 01 02 00 14 02 01 00 04 00 04 9F 56 | |
| 12:01:49.931 | 01 02 00 14 02 01 FF FF FF FF 01 02 00 F5 88 | |
| 12:01:49.932 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 50 dest: 1 src: 1024 |
| 12:01:49.932 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 12:01:49.935 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Class2Events) |
| 12:01:49.935 | g20v2, 2-Byte Start/Stop, start: 0 stop: 0 | |
| 12:01:49.935 | [0] - flags: 0x01 count: 1 | |
| 12:01:49.935 | g20v2, 2-Byte Start/Stop, start: 41 stop: 41 | |
| 12:01:49.935 | [41] - flags: 0x01 count: 2 | |
| 12:01:49.935 | g20v2, 2-Byte Start/Stop, start: 1024 stop: 1024 | |
| 12:01:49.935 | [1024] - flags: 0x01 count: 2 | |
| 12:01:49.935 | g20v2, 2-Byte Start/Stop, start: 65535 stop: 65535 | |
| 12:01:49.935 | [65535] - flags: 0x01 count: 2 | |
| 12:01:49.936 | Passed procedure: 8.16.1.2.2 |